SPLITTER & MULTI PLUG OUTLET TIME-SAVING ACCESSORIES
The SPLITTER can supply up to 6 switchboards in the ACCESS range via a single 32A three-phase power supply, or up to 8 switchboards when coupled with a MULTI PLUG OUTLET (MPO).
SPLITTERS and MULTI PLUG OUTLETS are ideal accessories for saving maximum time when wiring ACCESS range switchboards, whose power can be electronically limited.
The SPLITTER can supply up to 6 switchboards in the ACCESS range via a single 32A three-phase power supply, or up to 8 switchboards when coupled with a MULTI PLUG OUTLET (MPO).
SPLITTERS and MULTI PLUG OUTLETS are ideal accessories for saving maximum time when wiring ACCESS range switchboards, whose power can be electronically limited.
The Access splitter is integrated into the ACCESS TECH application to facilitate phase balancing by technicians.
THE SPLITTER 32A CEE VERSION
The ACCESS SPLITTER is also available with a CEE32A socket outlet.
The straight version is suitable for connection via a power supply via the ceiling, while the angled version can be used to connect power supplies coming from the floor.
Both models further simplify the installation of electrical distribution, which can be carried out by stand installers.
The ACCESS SPLITTER is also available with a CEE32A socket outlet.
The straight version is suitable for connection via a power supply via the ceiling, while the angled version can be used to connect power supplies coming from the floor.
Both models further simplify the installation of electrical distribution, which can be carried out by stand installers.
THE MULTI PLUG OUTLET ACCESS
The ACCESS Multi Plug Outlet (MPO) is a simple single-phase power distributor.
The ACCESS quadruplet is the ideal complement to the SPLITTER. Supplied on one of the sockets via a side output of the SPLITTER or one of the outputs of another MPO, the three other sockets can be used to connect three switchboards with maximum efficiency and discretion.
The ACCESS Multi Plug Outlet (MPO) is a simple single-phase power distributor.
The ACCESS quadruplet is the ideal complement to the SPLITTER. Supplied on one of the sockets via a side output of the SPLITTER or one of the outputs of another MPO, the three other sockets can be used to connect three switchboards with maximum efficiency and discretion.
SIMPLIFYING THE POWER SUPPLY
The MULTI PLUG OUTLET can be used to add single-phase outputs to the SPLITTER ACCESS.
The MPO is connected using a powerCon32A/powerCon32A extension lead between one of the SPLITTER ACCESS sockets and one of the MPO sockets.
The MULTI PLUG OUTLET can be used to add single-phase outputs to the SPLITTER ACCESS.
The MPO is connected using a powerCon32A/powerCon32A extension lead between one of the SPLITTER ACCESS sockets and one of the MPO sockets.
ACCESSORIES ADAPTEDN TO ALL TYPES OF ELECTRICAL POWER SUPPL.Y ARCHITECTURES
Ideally, SPLITTERS and MULTI PLUG OUTLETS are positioned high up on the corner of shell scheme stand structures.
The 20mm diameter 'universal' safety studs are screwed onto the SPLITTER or MPO and are suitable for the posts of OCTANORM or SYMA SYSTEM 408 type stand structures. A 25mm diameter adaptor allows secure fixing to SODEM or SYMA SYSTEM 30 posts.
The 2 models can also be positioned upside down in a pit or gutter, thanks to the four flanges at the top.
Ideally, SPLITTERS and MULTI PLUG OUTLETS are positioned high up on the corner of shell scheme stand structures.
The 20mm diameter 'universal' safety studs are screwed onto the SPLITTER or MPO and are suitable for the posts of OCTANORM or SYMA SYSTEM 408 type stand structures. A 25mm diameter adaptor allows secure fixing to SODEM or SYMA SYSTEM 30 posts.
The 2 models can also be positioned upside down in a pit or gutter, thanks to the four flanges at the top.
TECHNICAL FEATURES SPLITTER
Dimensions: Overall length: 25cm x width: 17.5cm x height: 9.4cm (excluding central stud).
Weight: <1kg
Envelope : One-piece rotomoulded, bead-blasted and flame-retardant polyethylene (PE), 100% recyclable
Identification in the ACCESS TECH application via its number
Splitter identification: a label with the splitter number, visible from the stand
Phase identification: coloured covers (Brown/Black/Grey) on each socket for the 3 phases: L1/L2/L3
Dimensions: Overall length: 25cm x width: 17.5cm x height: 9.4cm (excluding central stud).
Weight: <1kg
Envelope : One-piece rotomoulded, bead-blasted and flame-retardant polyethylene (PE), 100% recyclable
Identification in the ACCESS TECH application via its number
Splitter identification: a label with the splitter number, visible from the stand
Phase identification: coloured covers (Brown/Black/Grey) on each socket for the 3 phases: L1/L2/L3
TECHNOCAL FEATURES MULTI PLUG OUTLET
Dimensions: overall length 25cm x width 17.5cm x height 9.4cm (excluding central stud)
Weight: <0.5kg
Wrapping : one-piece rotomoulded polyethylene (PE), microblasted and flamed, 100% recyclable
Dimensions: overall length 25cm x width 17.5cm x height 9.4cm (excluding central stud)
Weight: <0.5kg
Wrapping : one-piece rotomoulded polyethylene (PE), microblasted and flamed, 100% recyclable